- Accessories (19)
- Environmental Controls (7)
- Flange Mounted Disconnect Enclosures (6)
- Locks and Latches (1)
- Pushbutton Enclosures and Consolets (9)
- Type 1 and 3R Enclosures (9)
- Type 12 and 4 Enclosures (12)
- Type 4, 12 and 13 Oiltight Enclosures (11)
- Wireways and Trough Products (17)
- NEMA Type 1 (10)
- NEMA Type 12 (35)
- NEMA Type 13 (25)
- NEMA Type 3 (2)
- NEMA Type 3R (4)
- NEMA Type 4 (13)
- NEMA Type 4X (8)
- Type 5052 H-32 Aluminum (0)
- Galvanized Steel (14)
- Type 316 Stainless Steel (2)
- Type 304 Stainless Steel (9)
- Painted (56)
Type 4, 4X Single Door Enclosure for Flange Mounted Disconnect
Austin Type 4 and Type 4X single door enclosures for flange-mounted disconnects are designed to house the following safety disconnect equipment:
ABB Controls flange-mounted variable depth operating mechanisms for disconnect switches and circuit breakers
Allen-Bradley Bulletin 1494V disconnect switches with flange-mounted variable depth operating mechanisms and Bulletin 1494V flange-mounted variable depth operating mechanisms for circuit breakers. (These enclosures will not accept Allen-Bradley Bulletin 1494F disconnect devices or Bulletin 1494D circuit breaker operators.)
Cutler-Hammer/Westinghouse Type C361 flange-mounted variable depth operating mechanisms with disconnect switches and Type C371 flange-mounted variable depth operating mechanisms for circuit breakers.
General Electric Type STDA flange handles and variable depth operating mechanisms for disconnect switches and circuit breakers.
I-T-E Max-Flex flange-mounted variable depth operating handle for disconnect switches and circuit breakers.
Square D Class 9422 disconnect switches with flange-mounted variable depth operating mechanisms and Class 9422 flange-mounted variable depth operating mechanisms for circuit breakers. (These enclosures will not accept Square D Class 9422 bracket-mounted disconnect devices.)
Type 4 enclosures are painted ANSI 61 gray polyester powder outside and inside. Type 4X enclosures are unpainted. Optional panels are painted white polyester powder.
14 gauge steel or 14 gauge Type 304 stainless steel. Seams are continuously welded and ground smooth. External mounting feet. Door and body stiffeners in larger enclosures for rigidity. Formed lip around all sides of enclosure opening excludes liquids and contaminants. Stainless steel exterior hardware. Stainless steel door clamps on three sides of door provide a watertight seal. Door removable by pulling continuous hinge pin. Oil-resistant gasket. 3/8-16 threaded collar studs provided for mounting optional panel. Holes in body for mounting disconnect operating handle and operating mechanisms. Cover interlock bracket welded to door. Disconnect switch, operating handle, and operating mechanisms are not furnished with the enclosure. They must be ordered separately from the disconnect manufacturer. Enclosures under 40” height require 2-point door hardware. Enclosures 40” high and taller require 3-point door hardware. Pocket Print included.
For complete details, download the info sheet.
NEMA 4 Disconnect Enclosure - NF/DSC (9)
From 42x31.38x12 — 60x37.38x12
NEMA 4X Stainless Steel Disconnect Enclosure - NFX/DSC (9)
From 60x37.38x12 — 48x37.38x12